Guide for Choosing the Best Commercial LED flood Lights

What is LED Flood light?

Many engineering companies in the choice of outdoor lighting are like to use LED projection lamp shell of the projection lamp, such a projection lamp degree is enough, waterproof and dustproof, is the first choice of many engineering sides, so what are the benefits of such LED projection lamp shell? 

The projection lamp is actually a spotlight, so its irradiation Angle can be adjusted according to the LED projection lamp shell, so its use is more flexible, and the general LED projection lamp shell will have an Angle adjustment scale plate so that it can be adjusted more accurately according to the mark of the scale plate.  

With the constant change of market demand, the type of projection lamp has changed from traditional electric connection to intelligent induction solar projection lamp.  Compared with the traditional LED projection lamp, the intelligent projection lamp is freer from space and energy restrictions. 

LED project-light lamp shell size relative to the other lighting lamps and lanterns is very small, and thus can meet the needs of a wider range of installation sites, and in the process of using the LED project-light lamp shell is not easy to damage problem, LED project-light lamp shell its good heat dissipation, also won't because project-light lamp use time is too long, fever, nature of its service life is long. 

Compared with other Lights, the shell of the LED projection lamp can be controlled without a switch. During the procession, LED flood light can also be a kind of unique irradiation effect, which is the advanced dynamic lighting decoration effect that cannot be achieved by ordinary lamps. And since it's actually a spotlight that focuses light, 

Therefore, the lighting effect from the projection lamp is good, the color of the light is bright, and the light is not dazzling, on the contrary, it is also very soft, not only suitable for use outdoor, but also suitable for use in the family lighting. 

How to Choose Smart Flood Light?

LED Flood light is generally used for commercial lighting or engineering lighting. How to choose a suitable floodlight for your own needs?

 For the first step, it is necessary to check the luminance performance of the flood light. Above this condition, highlighting would be the first choice for most buyers;

The second procedure is to check the waterproof, dustproof and electric coefficient. Moreover, based on the usage condition for this kind of lamps and lanterns are generally for outdoors;

For the other hand, the degree of heat dissipation, this is one of the key factors to ensure the life of lamps and lanterns generally see what material the lamp body uses, pure copper heat dissipation performance will be better.

Many types of LED reflectors. Selection difficulties are particularly difficult for most customers. As the following 5 Elements explain the details for the reflectors.

1. Realistic requirements: Focusing on the ground, and choosing the right LED reflector is the same. The first thing that comes to mind is the need for lighting. Lighting requirements cannot be met. No doubt, this will greatly increase the unnecessary time and cost of customer-friends.
2. Adequate power, lighting, and color temperature: Many customers and friends are not very familiar with these professional issues and often need to consult the manufacturer.
3. the specific power depends on the actual lighting area of the factory. Higher power will result in higher energy costs, and lower power will not meet lighting requirements.
4. Electrical components and electrical components must comply with the requirements of relevant national regulations. They can accept the working temperature of the lamp chamber for a long time, provide the electrical parameters matching the light source, and meet various explosion-proof requirements. Explosion-proof LED lamps to have specific types of explosion-proof functions.
5. The connector cavity design must be designed to meet the requirements of the specific explosion-proof function and must also be easy to connect, leaving room for an appropriate driver sawtooth radius. After correct wiring, the clearance and leakage interval shall comply with relevant regulations. Connection of camera inner wall and normal operation may occur. Arc paint must be applied to the inner wall of the flash metal housing.

The electrical structure of the explosion-proof LED lamp cavity mainly includes:

（1）. Couplings, insulation bushings, and terminals must have satisfactory mechanical resistance to prevent damage when connecting equipment. The wiring must be strong and durable, avoid slack, and should not be loosened by vibration, heat, thermal expansion, and shortening of conductors and insulators.

 （2）Correctly distinguish power connectors. After rotation, assume that the cable plug is protruding from the junction box and the surrounding metal parts do not touch.

（3）. Terminals must take measures to prevent them from becoming loose, so as to avoid wire deformation at the root of terminals. Do not press the cable directly with the screw head.

This will damage the cable connector. Recommended reading: Explosion-proof LED lamp product technology needs to be promoted

（4）. Insulation sleeve shall be made of data with poor moisture absorption. For explosion-proof LED lamps with a voltage higher than 127 V, no bakelite products are used.

With the continuous development of explosion-proof LED shopping malls, enterprises must constantly sum up their strengths if they want to gain a firm foothold in the game. The arrival of intelligence will clarify the future development trend of explosion-proof LED lights, telling enterprises that they want to advance in product technology in the future and must innovate.

Today, there is no shortage of home technology for companies working in this country, companies in terms of product functionality, planning, and intelligence.